Home :: Sterling Power Inverters :: Sterling Power ProCombi S 12v, 2500w Sine Inverter Charger [PCS122500]

Sterling Power ProCombi S 12v, 2500w Sine Inverter Charger [PCS122500]

Sterling Power ProCombi S 12v, 2500w Sine Inverter Charger [PCS122500]
More products by: Sterling Power
£838.44 ex VAT
(£1006.13 inc VAT)
Qty
Product No: PCS122500

The Sterling power ProCombi is based on a single power module that can work either as an Inverter or as a battery charger. When mains power is available ProCombi operates as a powerful, fully automatic, multi stage battery charger simultaneously supplying the incoming power straight through to the on-board consumers. When mains power is disconnected the unit automatically reverts to operating as an inverter, supplying 230V from the battery, until mains power is again restored

What does the Pro Combi range offer?

On the battery charger side

  • 4 step constant current battery charging
  • 8 pre set battery type selector plus de-sulphation
  • powerful charge rate
  • will charge totally flat batteries
  • PFC, draws about 30% less power than conventional units

On the crossover side

  • 20 m/s crossover time, will not to lose any equipment due to power loss
  • 30 amp through current ability on all models
  • twin 30 amp / single 50 amp on the 3500 watt models

On the inverter side

  • high overload ability
  • high temperature rating
  • low quiescent current
  • power saver mode to automatically reduce power
  • allows through power even with no batteries connecte

On the remote control

  • ability to switch the unit on/off
  • ability to select or de select power saver mode

General

  • removable local panel to give remote control with waming and function I.e.d.
  • remote on/off plus remote power saver on/off
  • 10 metres remote cable
  • almost 20 alarms/ warnings/and information

General Features for ProCombi Q

  • Battery bank size: autodetected / auto program adjusted
  • Remote control: front control panel removable as remote
  • Size (mm) (w x h x l): 185 x 180 x  430 (1600 & 2500)
  • Weight: 18kg (1600); 20kg (2500)

General Features for ProCombi S

  • Remote control: front control panel removable as remote
  • Size (mm) (w x h x l): 185 x 180 x  430 (1600 & 2500); 227 x 180 x 512 (3500)
  • Weight: 20kg (1500); 20kg (2500); 24kg (3500)

There are 2 main models the Pro Combi Q for quasi-sinewave) and the Pro Combi S (for Pure-sinewave). So the simple question is what best suits your needs?

Pro Combi Q, (quasi-sine model) suitable for most installations, where you would use a microwave, fridge, hair dryer, vacuum cleaner, kettle, computer, etc The vast majority of products will run on quasi-sinewave.

Pro Combi S ( sine wave model ) where all the above plus washing machines, bread makers , thyristor controlled equipment are used - then sinewave is required

Downloads:

 

 

 

Sterling Power ProCombi S 12v, 2500w Sine Inverter Charger [PCS122500]
The chart which would be useful to send to who ever needs it, this very much airs on the side off caution for cables, there is no doubt thinner cable can be used but larger voltage drops would in-sue,
 
Back to Top