Home :: Sterling Power Inverters :: Sterling Power ProCombiQ 12v, 2500w Combination Charger [PCQ122500]
Sterling Power ProCombiQ 12v, 2500w Combination Charger [PCQ122500]

Sterling Power ProCombiQ 12v, 2500w Combination Charger [PCQ122500]
The chart which would be useful to send to who ever needs it, this very much airs on the side off caution for cables, there is no doubt thinner cable can be used but larger voltage drops would in-sue,

The Stirling Power ProCombi range of Inverter/Chargers are straightforward, powerful and robust. With the three functions of Inverter, Battery Charger and 30A changeover switch in one unit, they are an alternative to separate components where space, simplicity and ease of
installation are key considerations.

Free from many of the complex functions associated with similar alternatives, ProCombi represents a very energy efficient solution that is also easy on the pocket! For the vast majority of uses, the basic functionality is more than enough.

Battery charger function utilises advanced multi-stage characteristics and is suitable for permanent connection to the battery. Adjustment is easily made via a selector switch to accommodate alternative battery types.

Each unit is supplied as standard with an on board control and indicator panel that can be removed for remote mounting via a 10mtr cable that is also included with the unit.

Basic functionality;
The Sterling power ProCombi is based on a single power module that can work either as an Inverter or as a battery charger. When mains power is available ProCombi operates as a powerful, fully automatic, multi stage battery charger simultaneously supplying the incoming power straight through to the on-board consumers. When mains power is disconnected the unit automatically reverts to operating as an inverter, supplying 230V from the battery, until mains power is again restored. All this functionality is contained within a single box with minimal wiring required.

The Sterling Power ProCombi was voted ‘best buy’ in Sailing Today Combi test, March 2008

  • Compact, robust construction
  • Simple DIY installation
  • Fully automatic operation
  • Multi stage automatic battery charger with power factor correction (PFC)
  • Battery types selectable, Gel, SLA, AGM, Open Lead Acid, Calcium.
  • 35A no-break (20ms) transfer switch
  • 30A switched earth/neutral relay
  • Comprehensive status and alarm LED display
  • Remote panel included as standard
  • Very low no-load energy consumption (12v - 0.4A)(24v - 0.2A)
  • Compliant with CE and UL standards
  • Dimensions - 185mm x 180mm x 430mm
  • Weight - 1600w, 18kg - 2500w, 20kg


MRP : £524.92 You Pay Only £522.03 ex VAT You Save 1% ( £626.44 inc VAT )
Quantity Out of stock
: *
: *
: *