What does the Pro Combi range offer?
On the battery charger side
- 4 step constant current battery charging
- 8 pre set battery type selector plus de-sulphation
- powerful charge rate
- will charge totally flat batteries
- PFC, draws about 30% less power than conventional units
On the crossover side
- 20 m/s crossover time, will not to lose any equipment due to power loss
- 30 amp through current ability on all models
- twin 30 amp / single 50 amp on the 3500 watt models
On the inverter side
- high overload ability
- high temperature rating
- low quiescent current
- power saver mode to automatically reduce power
- allows through power even with no batteries connecte
On the remote control
- ability to switch the unit on/off
- ability to select or de select power saver mode
General
- removable local panel to give remote control with waming and function I.e.d.
- remote on/off plus remote power saver on/off
- 10 metres remote cable
- almost 20 alarms/ warnings/and information
General Features for ProCombi Q
- Battery bank size: autodetected / auto program adjusted
- Remote control: front control panel removable as remote
- Size (mm) (w x h x l): 185 x 180 x 430 (1600 & 2500)
- Weight: 18kg (1600); 20kg (2500)
General Features for ProCombi S
- Remote control: front control panel removable as remote
- Size (mm) (w x h x l): 185 x 180 x 430 (1600 & 2500); 227 x 180 x 512 (3500)
- Weight: 20kg (1500); 20kg (2500); 24kg (3500)
There are 2 main models the Pro Combi Q for quasi-sinewave) and the Pro Combi S (for Pure-sinewave). So the simple question is what best suits your needs?
Pro Combi Q, (quasi-sine model) suitable for most installations, where you would use a microwave, fridge, hair dryer, vacuum cleaner, kettle, computer, etc The vast majority of products will run on quasi-sinewave.
Pro Combi S ( sine wave model ) where all the above plus washing machines, bread makers , thyristor controlled equipment are used - then sinewave is required
Downloads: